1 Backup 2 NTBACKUP.EXE 3 NTBACKUP.INI 5 Cannot open the file "%s". 6 Cannot read the file "%s". 7 Cannot create the file "%s". 8 Cannot write the file "%s". 9 Invalid filename: %s 10 .TXT 11 %s has been changed. Save this file before closing? 12 Cannot find %s. 13 Cannot load Windows Help application. 14 Cannot close the file "%s". 16 MaynStream 17 Untitled 18 CAUTION! You are running Windows in Standard mode. Do not enter a DOS box while %s is running.\n\n\nTo disable this message, choose Disable. 19 Version %s Rev. %s 20 %s\n\n%s\n%s\n\nThe finest backup software\nin the industry. 21 Copyright © 1993-1994 Arcada Software, Inc.\nAll Rights Reserved 22 \n 23 NTBackup 24 1.0 25 1.0 26 3.41 27 Call Arcada Software's 1-800 number for\nadditional information on software products. 29 Microsoft Windows NT Backup 30 WARNING! The Data Path specified, "%s", is invalid.\n\nDefaulting to "%s". 31 WARNING! The Catalog Path specified, "%s", is invalid.\n\nDefaulting to "%s". 32 & 33 MS Shell Dlg 34 system 35 courier 40 Inconsistent resource files were found. Please reinstall %s. 41 The %s resource files were not found. Please reinstall %s. 50 Ready 51 Initializing... 52 Backing up files from disk to tape... 53 Transferring files from disk to tape... 54 Restoring files from tape to disk... 55 Verifying files... 56 Retensioning the tape... 57 Erasing the tape... 58 Cataloging the tape... 59 Rewinding the tape... 60 Ejecting the tape... 61 Initializing the file system... 62 Initializing the hardware... 63 Directories scanned: %d 64 Partially catalog the tape or remove it from the catalog. 65 Searching for unknown backup sets... 66 Initializing the catalogs... 67 Initializing the user interface... 68 Formatting the tape... 300 &Backup 301 &Restore 302 &Erase 303 Rete&nsion 304 &Job Status 305 &Check 306 &Uncheck 307 &Modified 308 &Advanced 309 &Undo 310 &Include 311 E&xclude 312 &Transfer 313 &Verify 314 Cata&log 315 &Search 316 &Next Set 317 &Eject 318 Re&wind 319 E&xit 350 Memory Trace ON/OFF 351 Status Line 400 OK 401 Cancel 402 &Retry 403 &Yes 404 &No 405 &Continue 406 &Abort 407 &Help 408 &Disable 409 &Ignore 500 Backup Status 501 Restore Status 502 Transfer Status 503 Verify Status 504 Catalog Status 505 Retension Status 506 Erase Status 507 Delete Status 508 Format Status 510 BACKUP.HLP 511 keys 512 commands 513 procedures 514 winhelp.hlp 515 Help file "%s" was not found. 520 386 Enhanced Mode 521 Standard Mode 522 Memory: 523 %d,%03d KB Free 524 System Resources: 525 %d%% Free 526 Microsoft Windows NT %s 527 SOFTWARE\Microsoft\Windows NT\CurrentVersion 528 CurrentVersion 529 RegisteredOwner 530 RegisteredOrganization 531 Version %s %s 532 Debug 533 HARDWARE\DESCRIPTION\System\CentralProcessor\0 534 Identifier 590 The specified path is not valid. 591 The path cannot contain a drive designator. 592 The path cannot contain a file name. 600 Delete a Job 601 Removing a Scheduled Job 602 Are you sure you want to delete job "%s"? 603 Are you sure you want to remove job "%s"? 604 No Job Selected 605 Please select a job to run. 606 Please select a job to edit. 607 Create a New Job 608 Job "%s" already exists. 609 No more job space available. 610 Job is not in the Job List. 611 Invalid Job Name 612 Please select a valid job name. 613 Please enter a valid job name. 614 Edit a Job 615 BACKUP 616 TRANSFER 620 PROGMAN 621 PMGROUP 622 Backup 623 Insertion failed. Program Manager must be running. 624 Job Icon for Program Manager 625 Inserting Job "%s" into Group "%s". Do you want to continue? 626 [CreateGroup(%s)][ShowGroup(%s,5)][AddItem(%s%s /J:"%s",%s,%s%s,%s )] 627 NTBACKUP.JOB 628 [CreateGroup(%s)] 629 14 630 16 631 15 632 /J:" 633 Job "%s" began execution on %s at %s. 634 Job "%s" ended execution on %s at %s. 635 Job "%s" was not found on %s at %s.\n 636 &More Jobs... 637 ** Scheduled ** 638 Job Execution Error. 639 The Method has been changed to copy. 640 VERIFY 641 SKIPPED 642 Selection File "%s" was not found on %s at %s.\n 643 \nSelection File "%s" was found on %s at %s, but contained\nno valid selections for the settings at that time.\n 650 *.SEL 651 NTBACKUP.SCH 652 /S: 653 /K: 700 Job File Error 701 Schedule File Error 702 This job has been scheduled. 710 No day of the week specified. 711 Please check at least one day of the week. 712 No week of the month specified. 713 Please check at least one week of the month. 714 Invalid File Name 715 Invalid Interval 750 Monday 751 Tuesday 752 Wednesday 753 Thursday 754 Friday 755 Saturday 756 Sunday 757 Day of the Week 758 &Monday 759 &Tuesday 760 &Wednesday 761 T&hursday 762 &Friday 763 &Saturday 764 S&unday 765 &First 766 &Second 767 &Third 768 Fo&urth 769 &Last 770 Week of the Month 780 Normal 781 Copy 782 Incremental 783 Differential 784 Daily 785 Tape created on 786 Passwords do not match. Would you like to try again? 787 Passwords do not match. 788 Password Error 789 Backup Set Information (%d of %d sets) 790 < Not Named > 791 \n\nWARNING: This tape is password protected. 792 This tape has been secured. You do not have the proper backup privileges. 793 This tape has been secured. You do not have the proper restore privileges. 794 Tape Security Violation 795 This tape has been secured. You do not have the proper privileges. 796 This tape has been secured. You do not have the proper erase privileges. 800 Warning: This tape is out of sequence. 801 All Tapes 802 *.* 803 Catalogs Backup 804 Catalog Maintenance Error 805 The tape in the drive cannot be removed from the catalog. 806 Catalog Information 807 No uncataloged sets were found on the tape. 808 Change to Partially Cataloged 809 Do you really want to change %s to partially cataloged? 810 Remove backup set from catalog 811 Do you really want to remove tape %s from the catalog? 812 Unable to load catalog data from the tape. 813 Backup Error 814 Current tape is from a different tape family. 815 Error Restoring File 816 Backup cannot restore %s: There is not enough space on the disk.\n\nDelete one or more files to increase disk space, and then try again. 830 Login to: 831 *.BKS 832 .BKS 833 Selections invalid for current network setting. 834 Network setting is currently Server/Volumes, but mapped drives were found. Do you wish to continue? 835 Network setting is currently Mapped Drives, but server/volumes were found. Do you wish to continue? 836 Server/Volumes 837 Mapped Drives 838 Advanced File Selection 839 No servers are currently attached. 840 No Files Selected. 841 Confirm Deletion of Selection File 842 Are you sure you want to delete the file "%s"? 843 Selection file "%s" is being used by job "%s". 844 %s Already Exists. 845 Do you want to replace "%s"? 846 Invalid File Name 847 Please enter a valid file name. 849 Please check the dates again. 850 The 'To' date must be later than the 'From' date. 851 A tape must be cataloged before making advanced selections. 852 No tapes are cataloged. 853 Selection file "%s" could not be found. 854 This selection file contains selections from a network drive that could not be found. 870 Unable to open selection file. 880 Invalid Next Time 882 Check the minutes and try again. 883 Check the hours and try again. 884 Check the am or pm and try again. 885 Check the day and try again. 886 Check the month and try again. 887 Check the year and try again. 888 All backup sets 890 Debug Settings Warning 891 The number of debug messages to keep must be at least 10. 892 The number of debug messages to keep may not be greater than 250. 893 The file name may not contain blanks. 900 Log Files 901 View Log File 902 Log File Name: %s 903 Current Date: %s 904 Current Time: %s 907 Logged on 908 .BKS 909 .TKS 910 .RSS 911 .LST 912 at 913 %8ld bytes 914 for 915 BKUP 916 .LOG 917 Scanning log file... 918 Log file contains more than %ld lines. 919 %s supports viewing only the first %ld lines. 938 Eject Tape 939 The tape has been rewound.\nPlease remove the tape and choose OK to continue. 940 There is no tape in the drive. 941 Tape Eject Failed.\n Not possible to eject tape now. 957 Insufficient memory available. Close other applications before starting this application again. 958 Insufficient memory available. To continue, close another application and choose Retry or choose Cancel to quit. 959 Insufficient memory available. 970 Page %4d Date: %s Time: %s Log File Name: %s 971 Do you want to print the log file? 972 A Printer Setup dialog box is already open.\n Close it and try again. 973 Print Manager 974 A default printer must be specified. 975 There are no log files selected to be printed. 976 Printing of log files canceled. 977 Printing of log files complete. 978 %d log files 979 %d log file 980 Unable to start the print operation. 981 Printer driver not found. 982 Cannot access the specified printer driver. 983 Printing "%s" Page %4d. Choose to cancel. 984 Printing "%s" complete. 985 Printer driver error. Setup failed. 986 There are no printers available. 987 on 988 Printer is currently unavailable. 1001 Back up data from disk to tape. 1002 Restore data from tape to disk. 1003 Catalog and search tape for backup sets. 1004 Erase a Tape 1005 Retension a Tape 1006 Rewind and Eject the Tape 1007 Change Hardware specific settings 1008 Exit this application; close it down 1009 Format a tape 1020 Expand the Tree One Level down 1021 Expand the current branch 1022 Expand All branches 1023 Collapse the current branch 1030 Show the tree list and the directory list. 1031 Show only the tree list. 1032 Show only the directory list. 1034 Show all of the file details. 1035 Show/Hide the Status Bar. 1036 Show/Hide the Tool Bar. 1037 Select a new font. 1038 Create a split bar to resize tree and directory windows. 1050 Check the highlighted item(s) 1051 Uncheck the highlighted item(s) 1080 Overlap active windows. 1081 Place active windows adjacent to one another. 1082 Arrange all icons. 1083 Update the contents of the active window. 1084 Close all user created windows. 1090 Display the Help Index window. 1091 Search for information on a specific subject 1092 Display help on the available keystroke commands. 1093 Display help on the available commands. 1094 Display help on MaynStream procedures. 1095 Display help on using the Help system. 1096 About Backup 3004 a 3005 p 3012 Insert a tape in %s. 3013 Replace the tape in %s. 3014 Press any key to continue... 3015 The tape in %s is not properly inserted. 3016 Backup of %s on %s at %s\nBackup set #%d on tape #%d\nBackup description: "%s" 3017 Do you want to append data to this tape? 3018 WARNING: ALL of the data on the tape in %s will be replaced.\n\nTape: %s\n Tape #%d\nSet #%d: %s\n\nDo you want to replace this information? 3019 Do you want to replace the data on this tape? 3020 WARNING: You are about to restore data to %s. 3021 Do you want to verify this data with the data on drive %s? 3023 Do you want to search for another backup set on this tape? 3024 Do you want to continue? 3025 The tape in %s is not blank. It was created by another application. Do you wish to continue? 3026 The tape in %s cannot be read. 3027 There is no more data on this tape. 3028 Searching for the backup set. Please wait... 3029 Rewinding the tape. Please wait... 3030 Waiting for the tape drive. Please wait... 3031 Backup started on %s at %s. 3032 Restore started on %s at %s. 3033 Verify started on %s at %s. 3034 Directory %s 3035 The file %s in use - skipped. 3036 Backup completed on %s at %s. 3037 Restore completed on %s at %s. 3038 Verify completed on %s at %s. 3039 Backed up %ld file in %ld directory. 3040 Backed up %ld files in %ld directory. 3041 Backed up %ld files in %ld directories. 3042 %ld Macintosh file was backed up. 3043 %ld Macintosh files were backed up. 3044 WARNING: "%s" is a corrupt file.\nThis file cannot be verified. 3045 One corrupt file was backed up. 3046 %ld corrupt files were backed up. 3047 File "%s" is in use but is being backed up anyway. 3048 %ld file was in use. 3049 %ld files were in use. 3050 %ld file was skipped. 3051 %ld files were skipped. 3052 Restored %ld file in %ld directory. 3053 Restored %ld files in %ld directory. 3054 Restored %ld files in %ld directories. 3055 %ld Macintosh file was restored. 3056 %ld Macintosh files were restored. 3057 One corrupt file was restored. This file was corrupt before it was backed up. 3058 %ld corrupt files were restored. These files were corrupt before they were backed up. 3059 WARNING: The corrupt file %s was restored. 3060 %ld in-use file was restored. 3061 %ld in-use files were restored. 3062 WARNING: The in-use file %s was restored. 3063 Verified %ld file in %ld directory. 3064 Verified %ld files in %ld directory. 3065 Verified %ld files in %ld directories. 3066 %ld Macintosh file was processed. 3067 %ld Macintosh files were processed. 3068 The file %s is different. 3069 %ld files were different. 3070 The file %s was not found on disk. 3071 Processed %s bytes in %d minute(s) and %d second(s). 3072 Processed %s bytes in %d minute(s). 3073 Processed %s bytes in %d second(s). 3074 Rate: %ld bytes/second. 3075 Verified %ld file in %ld directories. 3094 Write Protected 3095 Unknown Device 3096 3097 Seek error 3098 Sector not found. 3099 3100 Write prot 3101 3102 General failure. 3103 Unrecoverable Disk Error 3104 {List of skipped files during backup of %s, device %s at %s, %s.} 3106 The file %s is in use - waiting. 3107 \nBackup of "%s"\nBackup set #%d on tape #%d\nBackup description: "%s" 3108 List of corrupt files during Backup of %s, device %s at %s, %s. 3118 %ld file was different. 3119 File information found on tape: 3120 File information found on disk: 3121 {List of files not verified from %s, device %s on %s at %s.} 3122 Verify failed at offset %ld. 3123 The disk file was not found or was inaccessible. 3124 Contents verified. 3125 The selections for %s will be omitted from the operation. 3127 Transfer deletion started on %s at %s. 3128 Transfer deletion completed on %s at %s. 3129 Deleted %ld file in %ld directory. 3130 Deleted %ld files in %ld directory. 3131 Deleted %ld files in %ld directories. 3132 %ld Macintosh file was deleted. 3133 %ld Macintosh files were deleted. 3134 The file "%s" on disk is more recent than the version on tape. 3135 Enter a new password or press to skip the password: 3136 This tape is not password protected. 3137 Reenter the password to confirm that it is correct: 3138 The password does not match. Please try again. 3139 The password is confirmed. 3140 Enter the old password: 3141 The password does not match. Please try again. 3144 Tape created on 3145 Insert the following tape in %s:\n\n%s\nTape #%d. 3150 One file was not found. 3151 %ld files were not found. 3152 %ld directory was not found. 3153 %ld directories were not found. 3154 Directory %s not found on the disk. 3157 Insert tape #%d in %s. 3159 WARNING: This tape was created with the Transfer option. The data on this tape may have been permanently erased from your disk. 3160 WARNING: The CORRUPT.LST file was found. This file indicates that corrupt file(s) have been backed up. 3161 WARNING: Tape #%d is out of sequence. 3169 Abort, Retry, Fail? 3170 F 3171 Fail 3172 A 3173 Backup Abort 3174 R 3175 Retry 3176 Exclude script NOVELL.NKS was not found. 3177 Exclude script EXCLUDE.RSS was not found. 3178 Do you want to restore the bindery files if they are present in this backup set? 3179 Do you want to restore directory security information for each directory? 3180 A tape read error occurred. Writing recovered data to %s. 3181 The recovered data was associated with a file. 3182 The recovered data was associated with a directory. 3183 The tape data starting at offset %d, size %d was unreadable. The file has been padded. 3186 Do you want to erase the data on this tape? 3187 Tape retension started on %s at %s.\nRetensioning... 3188 Tape retension completed on %s at %s. 3189 Tape Erase started on %s at %s.\nErasing. 3190 Tape Erase completed on %s at %s. 3191 Tape security erase started on %s at %s.\nErasing... 3192 Tape security erase completed on %s at %s. 3193 Cataloging started on %s at %s. 3194 Cataloging completed on %s at %s. 3195 \nTape Name: "%s" 3200 Backup set #%d: %s\nPreviously cataloged 3201 Cataloging file detail information. Please wait... 3212 Do you want to delete all data from your disk? 3213 Do you want to verify the Backup operation? 3214 Do you want to verify the Restore operation? 3216 Backup set #%d: %s was added to the catalog. 3243 Unable to open the file %s - skipped. 3247 Security information will be restored for all selected directories, even if no files are restored to these directories. 3248 The tape was not read before it was erased. You must manually delete this tape from the catalog. 3249 WARNING: File %s will be smaller if restored. 3250 Do you want to restore this file? 3257 Insert tapes %d-%d in drives %d-%d. 3258 Drive %d 3260 To make an additional copy, wait for the tape to finish rewinding and insert another tape. 3261 Do you want to make another copy? 3263 Security information for the %s directory is different. 3266 %ld security difference was found. 3267 %ld security differences were found. 3268 Insufficient privilege for the file %s - skipped. 3269 Insufficient disk space. 3270 Unable to create the file %s. 3271 Unable to create the directory %s. 3272 Error restoring AFP resource data for the file %s. 3273 Error restoring the file %s. 3274 Unable to restore the directory %s. 3275 Unable to restore "File Attributes Security" for file %s 3277 Unable to restore "Extended Attribute" information for directory %s. 3282 Searching for the next file. Please wait... 3283 Press any key to return to the menu. 3285 Skip this file? 3286 Extended file information for %s is different. 3292 WARNING: This backup set contains Macintosh folders and files. To restore this information, filenames and directory names may need to be abbreviated from their original Macintosh format. 3296 WARNING: Unable to read extended file information for file "%s". 3297 \nTape #%d: "%s"\nBackup performed on %s at %s\nBackup set #%d: "%s" 3299 {Attachment to the device failed during backup of %s, device %s at %s, %s.} 3300 Error(s) were found during the operation. 3301 Examine %s for more detailed error information. 3302 Security information for the file %s is different. 3303 Extended Attribute information for the file %s is different. 3304 Resource fork data for the file %s is different. 3308 \nThe operation was successfully completed. 3309 You cannot append a transfer set to a tape containing data that was created using the Backup operation. 3323 \nVerify of "%s"\nBackup set #%d on tape #%d\nBackup description: "%s" 3326 The tape in the drive is unrecognizable. Use another tape. 3327 Transfer 3328 The tape in the drive is unrecognizable. 3329 The tape in the drive is blank. 3330 There is no tape in the drive. 3331 The tape in the drive is "%s" and was created by %s on %s at %s. 3333 Do you wish to Abort? 3334 Process Aborted 3335 The tape drive is busy. Please wait... 3336 The end of the tape was reached. When the tape finishes rewinding, insert the next tape for this backup. 3337 The tape is full. When the tape finishes rewinding, insert the next tape for this backup. 3338 %s backup of "%s" performed %s at %s by %s. 3339 Retensioning the tape may take several minutes. 3340 \n 3341 Search for the next backup set on tape: "%s"? 3342 Invalid tape for the Next Set on Tape operation. 3343 A backup set was found and has been added to the catalog. Do you want to continue searching? 3344 Poll drive is disabled. 3345 This tape cannot be cataloged. 3346 Tapes in this family require sequential access. Please insert the first tape in this family. 3347 Do you want to keep the current settings for this operation? 3348 Do you want to erase the password database? 3349 You have entered three invalid passwords. The password database has been disabled. 3350 The password failed to confirm. Please try again. 3351 Initializing the file system. 3352 Initializing the hardware. 3353 Initializing the application. 3354 Application initialized. 3355 Initializing the VLM. 3356 \n Opening log: %s, mode: %c\n 3357 Unable to attach to %s. 3358 \n Closing log: %s \n 3359 Backup set #%d: %s\nPreviously cataloged with file detail information. 3360 Blank Tape 3361 Foreign Tape 3362 Bad Tape 3363 File %s was skipped 3364 File %s was skipped by the user. 3365 Backup set #%d: %s\nImage Backup. 3366 No tape in the drive. 3367 The tape drive is busy. 3368 Unrecognizable Tape 3369 %s bytes %s %s\n 3370 Backed up %ld file in %ld directories. 3371 Aborting ... Completing backup of file. 3372 %s 3373 Processed %s bytes in 3374 %d hour, 3375 %d hours, 3376 %d minute, and 3377 %d minutes, and 3378 %d minute and 3379 %d minutes and 3380 %d second. 3381 %d seconds. 3382 Backup of "%s"\nBackup set #%d on tape #%d\nBackup description: "%s" 3383 Aborting ... Completing restore of file. 3384 Current File: 3386 Current File: %s\n\nChoose Continue to finish writing this file to tape, or Abort the backup immediately without finishing the current file. 3387 Current File: %s\n\nChoose Continue to finish writing this file to disk, or Abort the restore immediately without finishing the current file. 3388 Restored %ld file in %ld directories. 3389 WARNING: You have chosen to format this tape. All of the information on the tape will be destroyed! 3390 Format Tape 3391 Format started on %s at %s.\nFormatting... 3392 Format completed on %s at %s. 3393 Abort Operation 3395 A tape drive error was detected. 3396 \nOperation Completed. 3397 The tape is full. The tape has been rewound, insert the next tape for this backup. 3398 The end of the tape was reached and the tape has been rewound. Insert the next tape for this backup. 3399 The tape has been rewound. Insert tape #%d in %s. 3400 The active files restored will not become usable until the computer is restarted. 3401 This tape is of the same tape family. Insert a different tape in the drive. 3402 The tape in %s is not blank. It was created by another application. 3410 Software ECC Tape 3411 Newer Version Tape 3414 The network disk drive has stopped responding. Backup set aborted. 3417 Out of Sequence Tape 3418 Sytos ECC translation error. Please check the manual for possible solutions. 3419 SQL Tape 3500 Insufficient memory available. 3507 Error writing the script file %s. 3508 The tape operation was terminated by the user. 3509 Improperly linked tape drive channel. 3511 The tape in %s is write-protected. 3512 Unknown tape format message: %d. 3513 Unknown MSG handler message: %d. 3514 Unknown loops error: %d. 3515 Error opening the log file %s. 3517 Unknown log message: 0x%x. 3518 Error accessing the password database. 3519 Syntax error in command line. 3520 Syntax error on line %d of the script %s. 3521 Cannot open the script file %s. 3522 Too many nested script files. 3523 Target drive must match the source drive. Source: %s, target: %s. 3524 File may not be renamed. Source: %s Target: %s. 3525 Invalid source path or file name specified in %s. 3526 Invalid target path or file name specified in %s. 3527 Invalid parameter in %s. 3528 Error writing to the password database. 3529 Error reading the password database. 3530 The password database is full. Increase the value of "Max_PDBase_Entries" in the MAYNARD.INI file. 3531 You do not have privileges to restore to the volume %s. 3533 Unknown password database error: 0x%x. 3535 The supplied password does not match. Please try again. 3536 Error 0x%x during attachment to device %s. 3538 Tape positioning error on %s. 3540 Encryption Unit error: 0x%x. 3541 No files were selected for Backup. 3542 No files were selected for Verify. 3551 The tape operation was terminated. 3556 There are no more connections available for this device. 3564 The password does not match. 3566 Unknown loops prompt type: 0x%x. 3567 %s does not contain a tape. 3574 No files were selected for Restore. 3577 Connection to device %s has been lost. 3580 Nothing selected for Transfer. 3581 Unexpected end of backup set encountered on %s. 3582 The tape in %s is unrecognizable and cannot be read. 3583 Unable to read the tape in %s. 3584 Unable to write to the tape in %s. 3585 An inconsistency was encountered on the tape in %s. 3586 An error occurred during translation of data to or from the tape in %s. 3587 Error on the tape in %s. 3588 Error on %s. 3591 Unable to obtain the address of the server %s on the network. 3592 Unable to attach to server %s. 3593 Unable to login to server %s. Enter another user name and password. 3594 Error opening resource file: %s%s. 3595 Inconsistent tape hardware parameters were defined. 3596 Unknown device driver initialization error. 3597 The MaynStream software is already in use on this system. Concurrent use of MaynStream is not supported. 3602 An inconsistency was encountered on the tape in %s. Do not append to this tape. 3603 Unable to set the NT compression state for %s 3800 CDS_GetRemoteDriveBackup %d 3801 CDS_GetNRLDosVector returned %02X. 3802 SMB_Initialize returned %d (%04X) 3803 InitializeRemote : Buffs %d Unused %d 3804 rinitfs: Could not locate NRL function table. 3805 RewindDrive( ): hdl = %d 3806 Drv Error = %d 3807 ret_val = %d 3808 EraseDrive -- Exabyte: %d Security: %d 3809 Calling TpErase() ... 3810 Calling TpWriteEndSet() ... 3811 ReadNextSet( ): 3812 TpReadEndSet( ): 3813 EOS Detected 3814 EOM Detected 3815 TpRead( ): 3816 Error = %d Req = %ld Got = %ld 3817 ReadNextSet( ): ret_val = %d 3818 GotoBckUpSet( ) 3819 OpenDrive( ): Card = %d No = %d 3820 CloseDrive( ): 3821 -- Rewind 3822 -- No Rewind 3823 Baddr: %x Irq: %d Dma: %d No Drives: %d 3824 UpdateDriveStatus( ): 3825 Val = %lx Changed 3826 Val = %lx Unchanged 3827 Cataloging Elapsed Time : %d minute(s) and %d second(s) 3828 UI_TPOS: %s, tape #%d, set #%d 3829 Difference at head %u cyl %u sector %u\nTape Contents: 3830 %02X 3831 Disk Contents: 3833 Tape: bytes/sec˙%u sec/track˙%u rsect˙%lu num sect˙%lu sys_ind˙%u 3834 Disk: bytes/sec˙%u sec/track˙%u rsect˙%lu num sect˙%lu sys_ind˙%u 3835 REM_AttachToDLE 3836 REM_AttachToDLE: SMB_ConnectApplication returned %p 3837 REM_AttachToDLE: Found device %s 3838 REM_AttachToDLE: Binding... 3839 failed! %04X 3840 OK! 3841 REM_DetachDLE: SMB_ReleaseDevice 3842 REM_DetachDLE: SMB_DisconnectApplication 3843 %04X. 3844 RWS_AttachToDLE 3845 DLE_GetChild... 3846 RWS_DetachDLE: SMB_DisconnectApplication 3847 %d soft error(s) encountered, %d underrun(s) 3848 Requested Set: ID = %lx Seq = %d Set = %d 3849 Residual Read Buffer 3850 Attempting to VCB tape 3851 Current VCB: ID = %lx Seq = %d Set = %d 3852 PositionAtSet( ): TF Msg = %x 3853 UI Msg = %x 3854 TF_CloseSet 3855 Error detected 3856 - Read Buffer Left Over 3857 TF_OpenSet( ) 3858 Hold Buffer from last Close 3859 Destroying Hold buffer 3860 Rewind Requested from Open 3861 End of TF_OpenSet: Ret_val = %d Buffs = %d HiWater = %d 3862 TF_AllocateTapeBuffers( ): SysMem = %ld Reserved = %ld 3863 End Allocate: No = %d Sz = %ld 3864 TF_FreeTapeBuffers( ): Start = %d 3865 End = %d 3866 TF_GetNextTapeRequest( ): Recalled in Error State 3867 TF_GetNextTapeRequest( ) Error = %d 3868 AbortRead( ) 3869 TF_InitiateWatch( ) 3870 Watch Rewind 3871 Device Error = %d 3872 GotoBlock( ): vPBA = %lx vLBA = %lx rLBA = %lx rBLK = %lx 3873 Determined driver: %s 3874 Using driver: %s 3875 TpInit() returned - %x 3876 TF_WatchDrive( ) 3877 Drv_ret Action = %d Error = %d Len Got = %d 3878 Watch Return = %d 3879 TF_EndWatch( ) 3880 Current Block is = %x 3881 UI_PurgeCatalog( ) = 0x%x 3882 %s 3883 No longer able to read disk at head %u cylinder %u sector %u 3884 Not verifying bad sector at head %u cyl %u sector %u 3885 Unable to read disk at head %u cyl %u sector %u 3886 Unable to write to disk at head %u cyl %u sector %u 3887 Closing Bindery 3888 AL = %x 3889 Opening Bindery 3890 Card %d Parameter Block: 3891 %8lx %8lx %8lx %8lx %8lx 3892 DriverAddr = %lx lw_channels = %lx 3893 Attach to %s 3894 Detach from %s 3895 NOVELL(%d) server %s, volume %s, supp = 0x%02x 3896 Base = "%s" 3897 Card %x number of attached drives %x 3898 Card %x init error status = %x 4000 Verify 4001 Insert Tape 4002 Replace Information 4003 Append Information 4004 File In-Use 4005 Continue 4006 Copy Tape 4007 Erase 4008 Corrupt File 4009 Restore 4010 Macintosh Names 4011 Bindery Files 4012 Security Information 4013 Backup Error 4014 Next Set on Tape 4015 Retension 4016 Keep Current Settings 4017 Warning 4018 Tape Password 4019 Method Is Invalid 4020 Abort 4200 MM/dd/yyyy 4201 : 4202 am 4203 pm 4204 , 4220 Read Only Drive Encountered! 4225 Drive %s will not have the attribute bits reset during backup. 4400 Loading set list from tape. 4401 Loading set directory from tape. 4402 The tape 4403 the tape drive 5000 MS_SCSI 5001 Maynard PC 8-Bit SCSI Controller 5002 Maynard PC 16-Bit SCSI Controller 5003 Maynard PS/2 SCSI Controller 5004 MS_QIC 5005 Maynard PC QIC-02 Controller 5006 Maynard PS/2 QIC-02 Controller 5007 AD_SCSI 5008 ASPI PC SCSI Controller 5009 ASPI PS/2 SCSI Controller 5010 MS_DUMMY 5011 Maynard Dummy Controller 5012 IBM_SCSI 5013 IBM PS/2 SCSI Controller 5031 &Attached drives 5032 &I/O Address 5033 Interrupt &Number 5034 D&MA Channel 5035 Auto Determine 5036 None (non-DMA) 5040 360 5041 370 5042 FF60 5043 FF70 5050 0 5051 1 5052 2 5053 3 5054 4 5055 5 5056 6 5057 7 5058 8 5059 9 5060 10 5061 11 5062 12 5063 13 5064 14 5065 15 5100 Tape Hardware Initialization Results 5101 The hardware has not been initialized for this configuration. 5102 The hardware is ACTIVE and initialized for this configuration. 5103 The hardware FAILED to initialize for this configuration. 5104 The hardware is initializing. 5105 Select a controller card. 5110 The hardware has been tested successfully. 5111 Warning: this change requires a jumper change to the controller card. 5112 A SCSI tape device has been detected, but the tape driver has either not been installed, or failed to start. Make sure that the appropriate driver has been installed using the Add/Remove Tape Devices option in the Options menu of Windows NT Setup. 5113 Interrupt conflict. Change the controller interrupt number. 5114 DMA conflict. Change the controller card DMA setting. 5115 No card has been detected. Install a card in the machine. 5116 Invalid Base Address. Select a different address. 5117 Invalid Interrupt Number. Select a different number. 5118 Invalid DMA Channel. Select a different channel. 5119 The number of attached drives found (%u) does not match the configured value (%u). 5120 No Target ID has been selected. At least one Target ID must be selected. 5121 The Controller Card is Disabled. Enable it to perform the test. 5122 The device driver failed to load. This may be due to an incomplete installation. Reinstall or contact Technical Support. 5123 HARDWARE ERROR: 0x%.4x. Contact Technical Support. 5124 Hardware Configuration Warning 5125 A controller card has not been selected. Do you wish to select one now? 5150 Tape Drive Error Detected 5151 No tape device detected. If you have a tape device attached, make sure that the appropriate tape driver has been installed using the Add/Remove Tape Devices option in the Options menu of Windows NT Setup. Also check that tape device power is on, and cables are properly connected. 5152 A tape device has been detected, and the tape driver started. However, the tape device is not responding. Check that tape device power is on and cables are properly connected. 5153 Poll Drive Initialized 5154 Poll Drive Initialization failed - FS_OpenFileSys() 5155 Poll Drive Start Message: %d 5156 Poll Drive Poll Message: %d 5157 Poll Drive Stop Message: %d 5158 Poll Drive RE_ENTERED: Start Message 5159 Poll Drive RE_ENTERED: Poll Message 5160 Poll Drive RE_ENTERED: Stop Message 5161 Poll Drive FAILED: MINOR ERROR -- Temporarily Ending Poll Drive 5162 Poll Drive FAILED: SEVERE ERROR -- Shutting Off Poll Drive 5163 Tape Eject had a BIG PROBLEM: %d 5164 The tape drive is not responding. Please check to make sure the tape drive is on, the cables are connected and the tape driver is installed. Then restart the %s program. 6000 Backup 6001 /- 6002 , 6010 Append 6011 Verify 6012 Restrict 6013 Description 6014 Type 6015 Logfile 6016 Exceptions 6017 B 6018 Normal 6019 Copy 6020 Differential 6021 Incremental 6022 Daily 6023 #Compatible 6100 NTBackup 6110 BACKUP.LOG 6111 RESTORE.LOG 6112 Error %ld Logging EventId=%ld Type=%d nStrings=%d 6113 -- Event String %d: '%s' 9000 You do not have permission to access portions of\n %s.\nPlease see the owner or administrator to get permission. 9001 You do not have permission to access portions of\n %s.\nPlease see the owner or administrator to get permission. 9002 You do not have permission to access portions of\n %s.\nPlease see the owner or administrator to get permission. 9003 You do not have permission to access portions of\n %s.\nPlease see the owner or administrator to get permission. 9004 Error reading file data. 9005 Error writing file data. 9006 Unable to read security information. 9007 Unable to write security information. 9008 Error reading Extended Attribute information. 9009 Error writing Extended Attribute information. 9010 Difference encountered in Extended Attribute information. 9011 Error reading alternate file data. 9012 Error writing alternate file data. 9013 Error reading file link information. 9014 Unable to create file link. 9015 Difference encountered in file data. 9016 Difference encountered in security information. 9017 Difference encountered in alternate file data. 10100 Browse 10101 Log Files(*.LOG) 10102 *.log 10103 All Files(*.*) 10104 *.* 10200 Timeout before function completed 10201 End of media early warning 10202 Bad data 10203 No tape is in drive 10204 File mark encountered 10205 No data 10206 Invalid command 10207 Bus reset 10208 Write protected tape 10209 Hardware failure 10210 Unknown error 10211 Attempt to move past end of tape 10212 Device block size differs from size with which tape was written 10213 Tape is not formatted 10214 initialize 10215 claim device 10216 close device 10217 deinitialize 10218 read data from tape 10219 write data to tape 10220 write a file mark to tape 10221 space forward by file marks 10222 space backward by file marks 10223 space to end of data 10224 space forward by blocks 10225 space backward by blocks 10226 erase the tape 10227 rewind the tape 10228 rewind the tape 10229 retension the tape 10230 get device status 10231 release device 10232 seek to a logical tape address 10233 report current logical tape address 10234 mount the tape 10235 dismount the tape 10236 get device information 10237 change physical block size 10238 enable/disable hardware compression 10239 eject the tape 10240 The tape device driver failed on a request to %s. 10241 The tape device failed on a request to %s. 10242 The tape device reported an error on a request to %s.\n\nError reported:\n%s. 10244 Tape Drive Error 10960 Drives 10961 Servers 10962 Tapes 10963 Search Results 10964 Error 10965 No matching files were found. 10966 None of the backup sets matched the requested volume. 10967 Too many files matched the selection criteria. More files were found than will be displayed. 10968 There are no cataloged tapes to search. 10969 Invalid file name. 10970 Searching tape "%s", set %d 10971 Files scanned: %d 10972 Catalog Warning 10973 This set is not completely cataloged. 10974 This set must be cataloged before it can be viewed. 10975 This tape is out of sequence. 10976 Image backups cannot be viewed or restored. 10977 Catalog Error 10978 Error reading a catalog file, the file may be corrupt. 10979 Error writing a catalog file, check available disk space. 10980 Error opening a catalog file, check available disk space. 10981 Not enough available file handles. 10982 Error positioning in a catalog file. The file may be corrupt. 10983 Insufficient memory available. 10984 Insufficient disk space. 10985 Unknown error. 10986 Logging error 10987 Insufficient disk space. 10988 Device Error. 10989 Drive not responding. 10990 Set %d 10991 norm 10992 diff 10993 incr 10994 image 10995 copy 10996 You are not logged in to the server. 10997 STARTUP.BKS 10998 Untitled Tape 10999 Warning 11000 All open volumes for this server must be closed. 11001 Erase Warning 11002 Are you sure you want to erase the tape in the drive ? 11003 daily 11004 Tapes %d/%d 11005 Tape %d 11006 Foreign Tape 11007 The tape in the drive must be erased before it can be used. 11008 Unrecognizable Tape 11009 The tape in the drive has an unrecognizable format or is not formatted. 11010 Drive %s %s 11011 Out of Sequence Error 11012 Tapes in this family require sequential access. Only tape one of the family can be independently identified. 11013 This set is compressed and cannot be viewed or restored. 11014 This set is encrypted and cannot be viewed or restored. 11015 This set was written with a newer version of software and cannot be viewed or restored. 11016 This set contains an SMS data stream and cannot be viewed or restored. 11017 This tape was written with software ECC and cannot be read by this application. 11018 This tape was made with a newer version of software and cannot be read by this application. 11019 Access Denied. 11020 This tape was created with Microsoft(R) SQL Server(c). The data cannot be translated by this application.